Kohler KDI 2504TM Workshop Manual page 168

11
11.11.5 Flange plate / housing assembly
1. Execute the operations described in point 6
of Par. 11.11.4.
2. Fasten housing or plate L by using
capscrews A and strictly following the order
shown in Fig. 11.61 (tightening torque at 85
Nm).
3. Fasten housing or plate L by using
capscrews B (tightening torque at 270 Nm).
11.11.6 Flywheel assembly
1. Execute the operations described in
9.5.2.
EN 168
INFORMATION ABOUT OPTIONAL
COMPONENTS
Par.
Fig. 11.61