Kohler KDI 2504TM Workshop Manual page 32

2
NOTE: Component not necessarily supplied by KOHLER.
Important
•
The air filter is a dry-type one, with a replaceable paper
filter cartridge
•
The filter intake must be positioned in a cool area.
•
The temperature of the aspirated air must never exceed
ambient temperature by more than 10°C (if you are using
a pipe, its length must not exceed 400 mm and it must
be as straight as possible).
2.12.2 Turbocharger
The turbocharger is controlled by means of exhaust gas that
activates the turbine.
Important
•
See Par
Tab. 2.29b
POS. DESCRIPTION
1 Air intake hose
2 Air compression volute
3 Turbo charger central body
4 Turbine housing with Waste Gate valve
5 Gas exhaust flange
6 Waste Gate control valve hose
7 Waste Gate valve control actuator
8 Waste Gate control valve linkage
9 Engine crankcase breather
10 Compressed air delivery hose to the intake manifold
11 Oil drain pipe
12 Turbo charger lubrication pipe
EN 32
TECHNICAL INFORMATION
2.18.
POS. DESCRIPTION
H Air filter cartridge
M Filter cover
N Filter support
Q Dust exhaust valve
R Dust exhaust valve
Fig 2.24