Kohler KDI 2504TM Workshop Manual page 177

Fig.: Figure.
Component, or group of main components, able to carry out specific functions on the
Functional
engine.
units:
G
Galvanised: Material that has undergone surface protection treatment.
Grinding (valves and Cleaning operation of the valves and seats carried out with an abrasive paste (refer
to an authorised service station for this type of operation).
seats):
H
Heater: A device that heats the intake air by means of an electrical resistor.
Heavy Type of extreme condition referred to the work environment in which the engine is used
(very dusty - dirty area, or in a contaminated environment due to various types of gas).
conditions:
I
Idle speed operation:
K
KDI: "Kohler Direct Injection"
M
A group of maintenance actions that have the sole objective to control and replace
Maintenance -
elements on their expiry, without modifying or improving the functions carried out by
periodic
the system, neither increasing the value nor improving performance.
MAX: Maximum.
It is a mixture of products by means of a chemical conversion of oils and animal and/or
Methyl ester:
vegetable fat, which is used to produce Biofuel.
Min.: Minutes.
Minimum.
MIN:
Model: Model, engine identification plate, which indicates the engine's model.
N
GLOSSARY
Operation of a running engine with the vehicle stopped and on idle speed.
15
177
EN