Kohler KDI 2504TM Workshop Manual page 40

2
2.15.5 Cold start advance
The Cold Start Advance E device is part of injection pump D;
it provides for advance injection modification to enable
advance of the engine at low temperatures.
The device is controlled by the ECU H.
2.15.6 Electro-Stop
The electro-stop F device is part of injection pump D; it turns
off the engine by blocking the flow of fuel into pump D.
2.15.7 ECU starting
The H device assists cold engine ignition controlling the "cold
starting device" (Heater) and the "Cold Start Advance" (CSA).
Tab. 2.35a indicates the activation times based on the
ambient temperatur.
Tab. 2.35a
°C
≤ 20 ÷ -15
- 16
- 21
-26
≤ -32
EN 40
TECHNICAL INFORMATION
HEATER CSA
0''
16''
21''
26''
32''
Fig 2.38
Fig 2.39a
Fig 2.39b
120''
Fig 2.40