9
LUBRICATION SYSTEM
84
85
86
88
- 48 -
87
89
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00
Oil pump
Components:
1 Cover
2 Shaft
3 Key
4 Pin
5 Internal rotor
6 External rotor
Oil pump delivery at 3000 rpm is 5.8 l/min.
Oil pump - Clearance between rotors
Measure clearance as shown in the figure; the max. value is 0.13 mm;
wear limit 0.25 mm.
Oil pressure regulation valve
Components for KD 315 and KD 350:
1 Spring
2 Valve
Free length A of the spring is 27.50-27.75 mm.
Components for KD 225:
4 Ball
5 Spring
Free length A of the spring is 23.50-24.50 mm.
Components for KD 400-440:
7
Plunger
8
Spring
10
Cup
11 Snap ring
Free length A of the spring is 25,50÷25,75 mm.
Note: If A is 1 mm less than the given value, replace the valve.
Valve setting is not adjustable.
Internal strainer
The oil pick-up strainer is made of nylon 66. Its degree of filtration is
500 µm.
Dimensions (mm):
A = M16x1.5
B = 64
C = 102
D = 12
3 Plug
6 Plug
9 Washer