Table of Contents
Advertisement
5-3-5 Confidential File Printout
If the user has forgotten the password, you can find it on the system report (function 92).
However, if the user cannot find out the personal ID specified by the sender, which overrides the password, then use the
following procedure.
1.
When the machine is in standby, simultaneously press 1, 2, 3, 4 and 5 to enter the service mode.
2.
Press the Function key, enter 75, then press Yes.
3.
Enter # 0.
4.
Press Copy.
All memory files will be printed, including confidential files. However, they will not be erased from memory.
To erase the confidential files from memory:
1.
Change the data in RAM address 15E6 to 00, using function 91.
2.
Switch the machine off, wait for
3.
Re-store files for transmission.
ten seconds, then switch back on.
5 - 34
Advertisement
Table of Contents
