Canceling A Memory Transmission; Canceling The Transmission Before The Original Is Scanned; Canceling A Transmission While The Original Is Being Scanned; Canceling A Transmission While The Message Is Being Sent - Ricoh 3800C Operating Instructions Manual

Faxing

Canceling a Memory Transmission

Canceling the Transmission
Before the Original is Scanned
Canceling a transmission before
2
pressing the { { { { Start} } } } key. Use this pro-
cedure to cancel a transmission before
the original has been scanned.
A A A A
Press the { { { { Clear Modes} } } } key.
Note
❒ When documents are placed in
the optional Document Feeder
(ADF), you can cancel the trans-
mission by just removing them.
Canceling a Transmission While
the Original is Being Scanned
Canceling a transmission after press-
ing the { { { { Start} } } } key. Use this procedure
to cancel a transmission after the orig-
inal has been scanned.
A A A A
Press the { { { { Clear/Stop} } } } key.
The machine will stop scanning
the original and the data will not
be sent.
32
Canceling a Transmission While
the Message is Being Sent
Use this procedure to cancel a trans-
mission after the original has been
scanned.
Canceling a transmission using
[Change/Stop TX File]
A A A A
Press [Change/Stop TX File].
The list of programmed files being
transmitted or waiting for trans-
mission is displayed.
B B B B
Select the file you want to cancel.
Note
❒ If the desired file is not shown,
press [U U U U Prev.] or [T T T T Next].