Kyocera TASKalfa 7002i Service Manual page 1069

Step Check description
8 Checking the paper
9 Checking the paper
10 Checking the paper
11 Checking the PF convey-
ing sensor
12 Checking the PF convey-
ing clutch
13 Checking the PF feed
motor
14 Checking the drive parts
15 Checking the PF convey-
ing clutch
16 Checking the PF feed
motor
Assumed cause
Paper gets curled down-
ward or waving.
Unspecified papers are
used.
foreign objects are on the
paper.
The PF conveying sensor
does not properly operate.
The PF conveying clutch
does not properly operate.
The PF feed motor does
not properly operate.
The drive from the PF feed
motor is not properly trans-
mitted.
The PF conveying clutch
does not properly operate.
The PF feed motor does
not properly operate.
7-209
Measures
Fix or replace paper. If it is
difficult to replace, relocate
the leading edge with the
trailing edge of the paper to
feed or turn over the paper,
and reinstall it.
Explain to the user to use the
paper within the specifica-
tions.
Remove the paper with for-
eign objects.
Reattach PF conveying sen-
sor 1 and reinsert the con-
nector. If not repaired,
replace the sensor. (Side
multi feeder)
Execute U247 [SMT] >
[Clutch] > [Feed1 Clutch]. If
PF conveying clutch 1 does
not properly operate, reattach
it and reinsert the connector.
If not repaired, replace it.
Execute U247 [SMT] >
[Motor] > [On] or [Off]. If the
PF feed motor does not prop-
erly operate, reattach it and
reinsert the connector. If not
repaired, replace it.
Check if the PF feed motor
smoothly rotates by a hand.
Then, clean and reattach the
drive parts if necessary. If not
repaired, replace them. (Side
multi feeder)
Execute U247 [Side 2PF] >
[Clutch] > [V Feed(H) Clutch].
If PF conveying clutch 1 does
not properly operate, reattach
it and reinsert the connector.
If not repaired, replace it.
Execute U247 [Side 2PF] >
[Motor] > [On] or [Off]. If the
PF feed motor does not prop-
erly operate, reattach it and
reinsert the connector. If not
repaired, replace it.
2WA/2NJ/2RK
Reference
Executing
U247
Executing
U247
Executing
U247
Executing
U247