Kyocera TASKalfa 7002i Service Manual page 742

U253 Switching the double/single counts
(Message: Set Double/Single Count)
Contents
Switches the count mode for printing mode of the total counter.
Purpose
Select, according to user's request (copy service provider), if the maximum size paper is to be
counted as one sheet (single count) or two sheets (double count)
Setting
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
B/W
3.Select the count mode to set.
Items
SGL(All)
DBL(A3/Ledger)
DBL(B4)
DBL(Folio)
* :Initial setting value: SGL(All) (100V model) / DBL(A3/Ledger) (120V/220-240V model)
*2: The Folio length can be set to between 330 and 356 mm using maintenance mode U035.
However, the double count will be applied when the set value is 330mm (Initial value) or lon-
ger.
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Switch the counter for B/W mode (Single/Double Count)
Set single count for all the paper sizes
Set double counts for A3 (420mm) or more
Set double count if the size is Legal (356mm) or larger
Set double count for Folio size or larger *2
6-149
Contents
Contents
2WA/2NJ/2RK-1