Kyocera TASKalfa 7002i Service Manual page 641

U053 Adjusting the motor speed
(Message:Adjust Motor Speed)
Contents
Execute the motor speed fine tuning.
Purpose
No need to change the basic settings. Change the set value when an image failure occurs.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Items
Motor1
Motor2
Motor3
Motor1 Half
Motor2 Half
Motor3 Half
Setting: Motor1
1.Select the item to adjust.
2.The screen for adjusting is displayed.
3.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Drum(K) Adjusts the drum motor(K)
4.Press the [Start] key to set the setting value.
Setting: Motor2
1.Select the item to adjust.
* :The screen for adjusting is displayed.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Dev(K) Adjusts the developer K
Regist Adjusts the registration motor
Sep Belt Adjusts the transfer motor
V Feed Adjusts the middle conveying motor
Exit Adjusts the eject motor
3.Press the [Start] key to set the setting value.
Sets the Motor1
Sets the Motor2
Sets the Motor3
Sets the Motor1 Half
Sets the Motor2 Half
Sets the Motor3 Half
Contents
Contents
6-48
Contents
Setting range Data
varia-
tion
-5000 to 5000 -
Setting range Data
varia-
tion
-5000 to 5000 -
-5000 to 5000 -
-5000 to 5000 -
-5000 to 5000 -
-5000 to 5000 -
2WA/2NJ/2RK-2
Initial setting
90 80 70
ppm ppm ppm
0 0 0
Initial setting
90 80 70
ppm ppm ppm
0 0 0
24 24 27
0 0 0
18 18 20
42 42 50