Kyocera TASKalfa 7002i Service Manual page 733

Setting: Staple Pos
1.Select [Staple Pos 1], [Staple Pos 2] or [Staple Pos 3].
2.Change the setting value by using [+] [-] key or the numeric keypad.
Content to adjust
Adjustment of booklet stapling position for
A4/Letter size
Adjustment of booklet stapling position for
B4/Letter size
Adjustment of booklet stapling position for
A3/Ledger/8K size
* :Increase the set value if the staple position is shifted to the right side (sample 1).
Decrease the set value if the staple position is shifted to the left side (sample 2).
Refer ence value A: A4, Letter: Length of paper × 1/2 ± 2 mmA3, Ledger, B4: Length of
paper × 1/2 ± 3 mm
3.Press the [Start] key to set the setting value.
Setting: Booklet Pos
1.Select [Booklet Pos 1], [Booklet Pos 2] or [Booklet Pos 3].
2.Change the setting value by using [+] [-] key or the numeric keypad.
Content to adjust
Adjustment of center folding position for A4/
Letter size
Adjustment of center folding position for B4/
Letter size
Adjustment of center folding position for A3/
Ledger/8K size
* :Increase the set value if the center folding position is shifted to the right side (sample 1).
Decrease the set value if the center folding position is shifted to the left side (sample 2).
Setting
range
-15 to 15
-15 to 15
-15 to 15
2 mm
Sample 1
Figure 6-17
Setting
range
-15 to 15
-15 to 15
-15 to 15
6-140
2WA/2NJ/2RK-1
Data varia- Initial setting
tion
0.32mm 0
0.32mm 0
0.32mm 0
2 mm
Sample 2
Data varia- Initial setting
tion
0.32mm 0
0.32mm 0
0.32mm 0