Kyocera TASKalfa 7002i Service Manual page 758

U402 Adjusting the printing margins
(Message: Adjust Print Margin)
Contents
Adjusts the scan image margins.
Purpose
Make the adjustment if margins are incorrect
* :If the leading edge margin is less than the specified value, it may cause jam at the fuser.
* :If there is no bottom margin, when continuously printing, it may cause an image smudge on
the second page.
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
5.Select the item to set.
Items
Lead
A Margin
C Margin
Trail
*: Initial setting value is a reference value as the value changes by the adjustment at the production.
6.Change the setting value by using [+] [-] key or the numeric keypad.
* :When the setting value is increased, the margin widens, and it narrows when the setting
value is decreased.
7.Press the [Start] key to set the setting value.
Precautions
Appropriate margins are not obtained after this adjustment, execute the following maintenance
mode.
U034(P.6-38) > U402
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Adjusts the printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Leading edge margin
(4.0 +1.5/-0 mm)
Left margin
(4.0 mm or less)
Trailing edge margin
(2.5 +1.0/-1.0 mm)
Figure 6-20
Setting range
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
Right margin
(4.0 mm or less)
6-165
2WA/2NJ/2RK-2
Data Initial
varia- setting
tion
0.1 mm 4.0
0.1 mm 3.0
0.1 mm 3.0
0.1 mm 3.9