Kyocera TASKalfa 7002i Service Manual page 756

U343 Duplex priority mode
(Message: Set Duplex Priority Mode)
Contents
Switches between duplex or simplex copy for the initial copy mode.
Purpose
Sett the frequently used settings depending on the user's usage.
Setting
1.Press the [Start] key.
2.Select the item to set.
Items
On
Off
* :Initial setting: Off
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U345 Setting the value for maintenance due indication
(Message: Set Maintenance Time Soon Display)
Contents
Sets when to display a message notifying that the time for maintenance is about to reach, by set-
ting the number of prints that can be made before the current maintenance cycle reaches.
Displays the maintenance precaution message when the page count reaches the set value
before the maintenance count.
Purpose
Change the time for maintenance precaution display.
Setting
1.Press the [Start] key.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Cnt
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Duplex print priority is enabled
Duplex print priority is disabled
Contents
Setting the maintenance time precaution display
(Remaining number of prints that can be made
before the current maintenance cycle reaches)
6-163
Contents
Setting
range
0 to 9999
2WA/2NJ/2RK
Initial set-
ting
0