Kyocera TASKalfa 7002i Service Manual page 657

U073 Scanner motor operation check
(Message: Check Scanner Motor Operation)
Contents
Simulate the scanner operation in any condition.
Purpose
Execute the scanner operation to check the abnormal operation and dust adhesion on the slit
glass.
Method
1.Press the [Start] key.
2.Select the item to execute.
Items
Scanner Motor
Home Position
Dust Check
DP Reading
Setting: Scanner Motor
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Zoom
Size
Lamp
Paper size corresponding to each set value
setting
4300 B5
5000 A4
5000 A5R
5100 11"×8 1/2"
5100 5 1/2"×8 1/2"
3.Press the [Start] key to set the setting value.
4.Select [Execute].
5.Press the [Start] key.
* :Scanning operation starts in a specified condition.
6.To stop the operation, press the [Stop] key.
Execute the scan operation
Home positioning operation
Check if there is dust by turning the exposure lamp on
scan position operation for the document processor
Contents
Magnification
Original size
Turning the exposure lamp on/off
Destination setting
6100
6600
7100
7800
8400
Contents
Setting range
25 to 400 (%)
0 to 10200
0: Off
1: On
Destination
B5R
8 1/2"×11"
A4R
Folio
8 1/2"×14"
6-64
2WA/2NJ/2RK
Data
variation
1%
100
-
setting Destination
8600 B4
9000 11"×15"
10000 A3
10200 11"×17"
Initial
setting
100
10200
1