Setting : Driving Time
1.Change the setting value by using the [+] [-] key.
Display
Time(sec)
Setting the drive normal timer
2.Press the [Start] key and then fix the setting value.
Setting: Timing
1.Change the setting value by using the [+] [-] key.
Display
Time(sec)
Setting the consecutive printing stan-
dard time
2.Press the [Start] key and then fix the setting value.
Setting: Target Value
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Thickness(K)
Toner layer calibration (Black)
Gamma(K)
Light amount calibration (Black)
3.Press the [Start] key to set the setting value.
Method: Calib
1.Select [Execute].
2.Press the [Start] key.
* :Calibration is started.
Items
Execute
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Description
Description
Contents
Executes Full Calibration
6-191
Setting range
Initial set-
300 to 3000 (s)
Setting range
Initial set-
0 to 3600 s
Setting
range
0 to 1000
0 to 500
Contents
2WA/2NJ/2RK-2
ting
300
ting
0
Initial setting
115
320