Kyocera TASKalfa 7002i Service Manual page 736

Setting: LCF
1.Select the item to set.
Display
Motor Off
On
Clutch C1 Clutch
C2 Clutch
Feed1 Clutch
Feed2 Clutch
Execute
2.Select [Execute].
3.Press the [Start] key. Each operation starts.
* :To stop the operation of the motor, press the [Stop] key.
Execution: Side Deck
1.Select the item to set.
Display
Motor Off
On
Clutch C1 Clutch
Cassette1 Solenoid
Execute
2.Select [Execute].
3.Press the [Start] key. Each operation starts.
4.To stop the motor drive, press the [Stop] key.
Execution: SMT
1.Select the item to set.
Display
Motor Off
On
Clutch C1 Clutch
Feed1 Clutch
Feed2 Clutch
Feed 3 Clutch
Separator Solenoid
Execute
2.Select [Execute].
3.Press the [Start] key. Each operation starts.
4.To stop the operation, press the [Stop] key.
PF paper feed motor OFF
PF paper feed motor ON
PF paper feed clutch 1: ON
PF paper feed clutch 2: ON
PF horizontal conveying clutch 1: ON
PF horizontal conveying clutch 2: ON
Starts operation
Contents
SD paper feed motor OFF
SD paper feed motor ON
SD paper feed clutch: ON
SD paper feed solenoid: ON
Starts operation
Contents
PF paper feed motor OFF
PF paper feed motor ON
PF paper feed clutch: ON
PF conveying clutch : ON
PF conveying clutch : ON
PF conveying clutch : ON
PF paper feed-shift solenoid: ON
Starts operation
6-143
2WA/2NJ/2RK
Contents