Kyocera TASKalfa 7002i Service Manual page 1386

U19100/E19100
Step Check description
1 Resending
2 Resetting the main power
and reinstalling the FAX
PWB
U19300/E19300
Step Check description
1 Resending
2 Resetting the main power
and reinstalling the FAX
PWB
3 Checking the firmware
4 Initializing the fax
5 Checking the FAX PWB
(2) Communication Errors
Error codes are listed on the communication reports, activity report, etc. The codes consist of an error
code indication U followed by a 5-digit number. (The V.34 error is indicated with E of the error code and 5-
digit number)
Regarding the 5-digit number, upper 3 digits indicate error and large classification of cause, lower 2 digits
small classification of cause. The lower 2 digits are 00 for the item not requiring the category.
Assumed cause
The transmission was
interrupted because there
is an error in the data dur-
ing transmission.
The transmission was
interrupted because there
is an error in the data dur-
ing transmission.
Assumed cause
The transmission was
interrupted because there
is an error in the data dur-
ing transmission.
The transmission was
interrupted because there
is an error in the data dur-
ing transmission.
The firmware is not the lat-
est version.
The FAX initial value was
changed.
The FAX PWB is faulty.
7-526
Measures
Resend.
Turn off the power switch and
pull out the power plug. After
passing 5s, reattach the FAX
PWB and reinsert the power
plug. Then, turn on the power
switch.
Measures
Resend.
Turn off the power switch and
pull out the power plug. After
passing 5s, reattach the FAX
PWB and reinsert the power
plug. Then, turn on the power
switch.
Upgrade the fax firmware to
the latest version.
Execute U600 to initialize the
FAX.
Replace the FAX PWB.
2WA/2NJ/2RK
Reference
Reference
Firmware
Update
U600 Exe-
cution
FAX Instal-
lation
Guide