Kyocera TASKalfa 7002i Service Manual page 845

U952 Maintenance mode work flow
(Message: Maintenance Mode Work Flow)
Contents
Execute the maintenance items in the order of registration in the main unit or the USB memory.
Purpose
Execute to register regular maintenance items.
Method
1.Press the [Start] key.
2.Select the item to execute.
* :The screen for executing is displayed.
Items
Continue
Execute(USB)
Execute
Entry(USB)
Entry
Log
Method: Continue
1.Select maintenance item number to execute.
2.Press the [Start] key.
* :Selected maintenance mode is executed.
Method: Execute(USB)
1.Check the LED display is off and turn the power switch off.
2.Insert a USB memory into the USB memory slot.
3.Turn the power switch on.
4.Enter maintenance item U952.
5.Select [Execute(USB)].
6.Select [workflow].
Items
WorkFlowData 01 - 07 Workflow data in a USB memory
7.Press the [Start] key.
* :Execute the maintenance items in the order of registration in the workflow.
Method: Execute
1.Select the place to save the data to execute.
Items
Data 1 - 8
2.Select the item to execute.
3.Press the [Start] key to start the processing.
* :The below work flow is preset at a shipment of the main unit.
Resume interrupted work flow.
Executes the work flow in a USB memory.
Execute the work flow saved in the main unit.
Executes the work flow in a USB memory.
Register the work flow in the main unit manually.
Displays the latest work flow execution history.
Work flow save area in the main unit
6-252
Contents
Contents
Contents
2WA/2NJ/2RK