Kyocera TASKalfa 7002i Service Manual page 646

U063 Shading position adjustment
(Message: Adjust Shading Position)
Contents
Changes the scanner shading position.
Purpose
Execute if the vertical white lines appears on the image and they are not improved after cleaning
the shading plate, namely there are scratches or dirt inside the shading plate.
By changing the shading position, shading is available where there is no influence of dirt or
scratch of the shading plate.
Setting
1.Press the [Start] key.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Position
* :If the setting value is raised, the shading position moves toward the machine left side and if
the setting value is lowered, it moves toward the machine right side.
3.Press the [Start] key to set the setting value.
Precautions
Test copy of the original is available by pressing the [System Menu] key as interruption copy
mode when executing this maintenance mode.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Changes the scanner shading position
Setting range
0 to 18
6-53
2WA/2NJ/2RK
Data Initial
variation setting
0.16 mm 0