Kyocera TASKalfa 7002i Service Manual page 780

U460 Conveying sensor adjustment
(Message: Adjust Conveying Sensor)
Contents
Correct the side multi tray and the multi feed sensor threshold of the document professor.
Purpose
When the multi feed frequently occurs, set the threshold in accordance to the environment.
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Display
DP
SMT
Execution
1.Select the item to set.
Display
Conveying Sensor
On/Off Config
Setting: On/Off Config
1.By using [+] [-] or the numeric keys, change the setting value.
Display
On
Off
* :Initial setting: On(1)
2.Press the [Start] key and then fix the setting value.
Setting: Conveying Sensor
1.Select the item to set.
Display
Threshold(Single)
Threshold(Multi)
Execute
Sensor(Non-P)*
Sensor*
* : The sensor value is for display only when using the DP.
Adjust/set the DP conveying sensor.
Adjust/set the SMT conveying sensor.
Setting the multi feed sensor/Executing the calibration
Setting the multi feed sensor switch ON/OFF
Valid for the multi feed detection.(1)
Invalid for the multi feed detection.(0)
Paper conveying threshold setting
Multi feed threshold setting
Executing the calibration
Display the sensor value when there is no paper.
Display the sensor value when there is paper.
6-187
Contents
Contents
Description
Description
2WA/2NJ/2RK-1