U206
Sets the coin vendor
(Message: Set Coin Vendor Mode)
Description
Sets the optional Coin Vendor connection.
Also, sets the details such as the operation mode and unit price when the coin vendor is
installed. (This is an optional device which is currently supported only by Japanese specification
machines.) (Support the Japanese specification only)
Purpose
Execute when a coin vendor is installed.
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
On/Off Config*
No Coin Action
Price
Boot Mode
Apl Charge Mode
* : Not displayed when selecting Parallel Coin Vendor in U204.
Setting: On/Off Config
1.Select the item to set.
Items
On
Off
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: No Coin Action
1.Select the item to set.
Items
All Clear
Auto Clear
Off
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
Sets the presence or absence of the coin vender
Behavior when change runs out during copying
Copy unit price by size
Setting activation mode
Extended charge unit
The coin vender is installed
The coin vender is not installed
All clear at coin shortage
Auto clear at coin shortage
Do nothing at coin shortage
6-116
Contents
Contents
Contents
2WA/2NJ/2RK-1