Kyocera TASKalfa 7002i Service Manual page 781

Setting: Threshold(Single)/(Multi)
1.Select the item to set.
2.By using [+] [-] or the numeric keys, change the setting value.
Display
Threshold(Single)
Threshold(Multi)
3.Press the [Start] key and then fix the setting value.
Method: Execute
1.Select [Execute].
2.Press the [Start] key. AC calibration is started.
Setting: On/Off Config
1.Select [On] or [Off].
Display
On
Off
* :Initial setting: Off
2.Press the [Start] key and then set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Description
Paper conveying threshold setting
Multi feed threshold setting
Valid for the multi feed sensor.
Invalid for the multi feed sensor.
6-188
Setting
range
0 to 255
0 to 255
Contents
2WA/2NJ/2RK
Initial set-
ting
0
0