Kyocera TASKalfa 7002i Service Manual page 1395

U00800/E00800
Step Check description
1 Checking the transmit start
speed
U00811/E00811
Step Check description
1 Resending
U00900/E00900
Step Check description
1 Resending
U01000/E01000
Step Check description
1 Resending
2 Checking the transmit start
speed
3 Changing the initial value
Assumed cause
A page transmission error
occurred because of
reception of a RTN or PIN
signal.
Assumed cause
A page reception error
remained after retry of
transmission in the ECM
mode.
Assumed cause
An RTN or PIN signal was
transmitted because of a
page reception error.
Assumed cause
An FTT signal was
received for a set number
of times after TCF signal
transmission at 2400 bps.
Or, an RTN signal was
received in response to a
Q signal (excluding EOP)
after transmission at 2400
bps.
Line condition is poor.
(Destination unit)
Line condition is poor.
(Own machine)
7-535
Measures
In case pages are not prop-
erly sent and resending does
not solve it, reduce transmit
start speed and resend the
data.
Measures
In case pages are not prop-
erly sent and resending does
not solve it, reduce transmit
start speed and resend the
data.
Measures
Resend the page if there is a
page not transmitted prop-
erly.
Measures
Resend.
Execute U630 [TX Speed] to
reduce the transmit start
speed. Then, resend the
data.
Change the default value of
the transmit start speed by
executing U630 [TX Speed].
2WA/2NJ/2RK
Reference
U630 Exe-
cution
Reference
U630 Exe-
cution
Reference
Reference
U630 Exe-
cution
U630 Exe-
cution