Kyocera TASKalfa 7002i Service Manual page 683

U136 Toner level detection setting
(Message: Set Toner Near End Detection)
Contents
Execute the level setting of printable pages between toner near end and toner empty.
Purpose
Change the timing of detecting toner near end earlier than the current setting if the interval
between toner near end and toner empty is too short.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :Change the setting value by using [+] [-] key or the numeric keypad.
Items
K
If the set value is increased, the time interval from the toner near end to the toner empty
becomes longer.
If the set value is reduced, the time interval from toner near end to toner empty becomes shorter.
0: no toner near end detection
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Setting the black toner level
Setting range
0 to 9
6-90
2WA/2NJ/2RK
Data Initial
variation setting
- 3