Setting: Staple HP
1.Select [Staple HP].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Front/rear staple home position adjustment
* :Increase the set value if the staple position is shifted to the machine front side (sample1).
Lower the set value if the staple position is shifted to the machine rear side (sample2).
3.Press the [Start] key to set the setting value.
Method: Booklet
1. Select the item to set.
Items
Width Up HP
Width Down HP
Staple Pos 1
Staple Pos 2
Staple Pos 3
Booklet Pos 1
Booklet Pos 2
Booklet Pos 3
Three Fold
Setting: Width Up HP/Width Down HP
1.Select [Width Up HP] or [Width Down HP].
2.Change the setting value by using [+] [-] key or the numeric keypad.
Adjustment of upper side registration home posi-
tion
Adjustment of lower side registration home posi-
tion
3. Press the [Start] key to set the setting value.
4. Press the [Stop] key to return to the screen to select the maintenance item No.
5. Enter U240 and select [Booklet] and then [Width Test(A3)].
*: The width guides of the center-folding unit will move to A3-size position.
6. Insert paper into the side registration guides to check the consistence.
7. Repeat the above adjustment until paper is properly in position.
Content to adjust
Sample 1
Adjustment of upper side registration home position
Adjustment of lower side registration home position
Adjustment of booklet stapling position for A4/Letter size
Adjustment of booklet stapling position for B4/Letter size
Adjustment of booklet stapling position for A3/Ledger/8K size
Adjustment of center folding position for A4/Letter size
Adjustment of center folding position for B4/Letter size
Adjustment of center folding position for A3/Ledger/8K size
Adjustment of tri- folding position
Content to adjust
Setting
range
-30 to 30
Sample 2
Contents
Setting
range
-15 to 15
-15 to 15
6-139
2WA/2NJ/2RK
Data varia-
Initial setting
tion
0.97mm
0
Data varia-
Initial setting
tion
0.34mm
0
0.34mm
0