Cleaning And Maintenance Checklist - Leica THERMOBRITE ELITE User Manual

7. Maintenance
7.1

Cleaning and maintenance checklist

Use the schedule below to clean and maintain your ThermoBrite Elite.
Task
Daily—Before each run
Check reagent level volume
Check reagent bottle filter position
Check waste bottle volume
Check the peristaltic tubing
Daily—After each run
Clean/dry sample chambers
Clean upper drip plate
Open Peristaltic Pump Cover
Clean pepsin bottle
Clean pepsin line
Weekly
Line wash
Line wash for Clearene lines
Empty waste bottles
Monthly
Clean reagent bottles
Clean waste bottles
Clean outside of ThermoBrite Elite
Clean slide carriers
Back up log files on Netbook
Back up protocol files on Netbook
As needed
Replace the Module Manifold Filters
Replace the Peristaltic Pump Tubing
Replace the fuses
84
Section
3.4.1 - Fluid Management System
3.4.1 - Fluid Management System
7.2.1 - Discarding Liquid Waste
7.6.2 - Replace the Peristaltic Pump Tubes
7.4.1.1 - Clean Sample Chambers
7.4.1.2 - Clean the Upper Drip Plate
7.4.1.3 - Clean the Pepsin Bottle
7.4.1.4 - Clean the Pepsin Line
7.3 - Line Wash
7.3 - Line Wash
7.2.1 - Discarding Liquid Waste
7.4.2.3 - Clean Reagent Bottles and Filters
7.4.2.4 - Clean Waste Bottles
7.4.2.1 - Clean Instrument Surfaces
7.4.2.2 - Clean Slide Carriers
7.5.2 - Back up Protocol Files on Netbook
7.5.1 - Back up Log Files on Netbook
7.6.1 - Replace the Module Manifold Filters
7.6.2 - Replace the Peristaltic Pump Tubes
7.6.3 - Replace the Fuses
ThermoBrite Elite User Manual
3855-7500-501 B02