Leica THERMOBRITE ELITE User Manual page 47

4. Carefully remove the reagent bottle cap with filter at an angle to avoid damaging the bottle filter.
5. Add reagents to Reagent Bottles in accordance with Reagent List displayed on the software screen.
6. Recap Reagent Bottles carefully; avoid damaging the bottle filter.
7. Insert then twist to lock the numbered Reagent Tube fitting to the cap of the appropriate Reagent Bottle.
ThermoBrite Elite User Manual
3855-7500-501 B02
Figure 5-2: Removing Reagent Bottle Caps and Filters
Figure 5-3: Lock Reagent Tube Fitting
5. Preparing the System for Run
47