Exit Valve Failed To Switch To Bypass Position; Inlet Valve Failed To Switch To Bypass Position; Inlet Valve Failed To Switch To Chamber; Instrument Failed Self-Test - Leica THERMOBRITE ELITE User Manual

8.2.5

Exit valve failed to switch to bypass position

Causes
The exit valve is not responding correctly.
8.2.6

Inlet valve failed to switch to bypass position

Causes
The inlet valve is not responding correctly.
8.2.7

Inlet valve failed to switch to chamber

Causes
The inlet valve is not responding correctly.
8.2.8

Instrument failed self-test

Causes
One or more of the instrument self-test did not pass.
8.2.9 Instrument thread is either terminated or
unresponsive within 20sec. Software will
terminate
Causes
The instrument is not responding to a software command. Restart the Netbook.
ThermoBrite Elite User Manual
3855-7500-501 B02
Remedies
Restart the Netbook and instrument.
If the problem persists, contact Technical Support or your
distributor.
Remedies
Restart the Netbook and instrument.
If the problem persists, contact Technical Support or your
distributor.
Remedies
Restart the Netbook and instrument.
If the problem persists, contact Technical Support or your
distributor.
Remedies
Ensure cover is on.
Restart the Netbook and instrument.
If the problem persists, contact Technical Support or your
distributor.
Remedies
If the problem persists, contact Technical Support or your
distributor.
8. Troubleshooting
103