Fluid Management System - Leica THERMOBRITE ELITE User Manual

3.4.1

Fluid Management System

1. Position the Fluid Management System immediately to the left and with the base at the same level as the
ThermoBrite Elite.
Do NOT position the Fluid Management System above or below the level of the instrument as this
could affect proper fluid flow.
2. Orient bottles such that the wire mesh filter is closest to the bottom-most edge for each respective bottle.
If the filter is not placed in the bottom-most edge of the bottle, flow errors might occur.
ThermoBrite Elite User Manual
3855-7500-501 B02
Figure 3-8: Fluid management system
Figure 3-9: Bottle positioning
3. Installation
29