Table of Contents
Advertisement
3. Installation
6. If the two-beep ready signal does not sound, or the LED activity is not a continuous green light, see the
Troubleshooting section.
7. Press the power switch on the Netbook, see image below.
8. Enter Windows Password: Thermobrite.
The ThermoBrite Elite System is shipped with a default password for ease of installation. Change
this password in accordance with your organization's password policy as part of the installation. To
change the default password, press Ctrl + Alt + Del, select Change a password and follow the
prompts.
Make sure you record the password in a safe location for reference by a Service Engineer when on site.
9. On the desktop, double-click the ThermoBrite Elite software icon.
10. Read and Accept the
28
Figure 3-6: Green LED on the right side of the front panel
Figure 3-7: Netbook Power switch
3.5 - End User License Agreement
.
ThermoBrite Elite User Manual
3855-7500-501 B02
Advertisement
Table of Contents
