Leica THERMOBRITE ELITE User Manual page 73

Reagent Incubate
This option is used to define the incubation time for the reagent step. The default is 5 minutes.
This step is relevant only if the Wait for temp before continuing check box was selected in the Temp step.
1. Double-click Incubate. Enter a time greater than 0.1 minutes for the specimen to remain at the temperature
previously selected in the Temp option.
2. Click Update to validate the entry. The Reagent Step screen is displayed.
Reagent Drain
This option does not need input.
Reagent Step Options
The following steps can be added:
Flush
l
Pause
l
ThermoBrite Elite User Manual
3855-7500-501 B02
Figure 6-29: Protocol Reagent Step—Incubation
6. Using the ThermoBrite Elite Software
73