Cleaning And Maintenance; Daily Cleaning - Leica CV5030 Instruction Manual

Robotic coverslipper

Hide thumbs Also See for CV5030:

Table of Contents

Cleaning and maintenance

8.1

• After extended non-operating times and generally always before

priming, the nozzle must be checked for dried residues of the

mountant and cleaned, if necessary.

• The suction devices for lifting coverslips must be regularly checked

for damage and dirt accumulation. Lightly contaminated suction de-

vices can be cleaned with a cloth moistened with solvent. Damaged

and heavily contaminated suction devices must be replaced.

• The skids of the feeder mechanism and the face of the capacitive

sensor between the suction devices must also be checked for con-

tamination during the suction check and cleaned, if necessary.

• Mountant buildup must be removed regularly from the headed dow-

els of the slide transport mechanism.

• The gripper must be regularly cleaned of mountant residues and

glass fragments.

• Output racks must be cleaned of mountant residues before they are

inserted.

• The area of the bath transport must be regularly checked for fallen

glass fragments, coverslips and mountant.

• Before inserting coverslips into the coverslip magazine, it must be

cleaned of any glass fragments and glass dust.

• The fume filter must be changed at regular intervals.

Instruction Manual V1.1 - 11/2002

Table of Contents