Table of Contents
Advertisement
6.4.1.2 Prime Step
The Prime step:
removes fluid from a previous protocol using another reagent, and
l
fills the lines to avoid flow errors.
l
You do not need to add a Prime step. The instrument automatically primes as it reaches each new step.
Adding a Prime step will result in higher volume of reagent use.
1. In the Protocol Steps field, click Add.
2. Click on Prime.
No options are available for the Prime step. The Protocol screen is displayed.
ThermoBrite Elite User Manual
3855-7500-501 B02
Figure 6-33: Add Prime Step
6. Using the ThermoBrite Elite Software
77
Advertisement
Table of Contents
