Start The Protocol - Leica THERMOBRITE ELITE User Manual

6. Using the ThermoBrite Elite Software
6. Click Next. The Protocol Dashboard is displayed.
6.3.4

Start the Protocol

1. If you have not already done so, load the slides in the corresponding Module slide position(s).
2. On the Protocol Dashboard, click Start.
3. Type your initials and if required, any notes.
4. Click Start Protocol to begin running the protocol.
56
Figure 6-8: Protocol Dashboard —Start
Figure 6-9: Protocol Dashboard—User Initials and Notes
ThermoBrite Elite User Manual
3855-7500-501 B02