Select A Protocol To Run - Leica THERMOBRITE ELITE User Manual

6.3.2

Select a Protocol to Run

1. On the Start screen click either:
Run— to select a protected protocol. You cannot modify a protected protocol.
l
Run/Create/Edit—to select a protected or unprotected protocol. Using this option, you can edit
l
unprotected protocols before running them. You can also use this option to create a new protocol. For
more information, see
The system displays the protocols available for selection. If you selected Run, only protected protocols are
displayed. If you selected Run/Create/Edit, both protected and unprotected protocols are displayed. The
protected protocols are bold and can be copied but not edited.
2. In the Available Protocols field, select a protocol name.
The system displays the protocol's description and the list of reagents necessary to run the protocol.
3. Click Run. The Protocol Dashboard is displayed.
ThermoBrite Elite User Manual
3855-7500-501 B02
6.4 - Creating a New Protocol.
Figure 6-2: Start screen
Figure 6-3: Select Protocol
6. Using the ThermoBrite Elite Software
53