Leica THERMOBRITE ELITE User Manual page 76

6. Using the ThermoBrite Elite Software
Save and Close
Use the following options to edit, or save the protocol steps:
Save and Close Save the reagent steps and display them in the Protocol Steps field
Delete Delete the selection
Up Move the selection one step up
Down Move the selection one step down
Before saving any protocol step, make sure the sub-steps are kept in proper sequence. If an option is out of
sequence, use the Up or Down buttons.
There is no Undo option.
If you select Back after updating, the system displays "Any changes you have made will not be saved. Do
you wish to discard changes and go back?". If you click Yes, none of the changes are saved. If you click No,
the dialog box will close and you can continue adding steps.
76
Figure 6-32: Protocol Reagent Step—Save
ThermoBrite Elite User Manual
3855-7500-501 B02