Installation - Leica THERMOBRITE ELITE User Manual

3. Installation

3.4 Installation
Make sure that all the Electrical, Space, and Environmental requirements have been met before installing the system. See
3.3 - Requirements.
Use a power cable with a grounded male connector suitable for the power outlet being used, which is rated
at 10 Amps or more and has an IEC320/CEE22 female connector to attach to the ThermoBrite Elite
instrument.
1. Connect the electrical cable to the power port located on the back of the ThermoBrite Elite and to an electrical
grounded outlet.
2. Connect the Netbook to the power supply and plug the power supply to a grounded electrical outlet (see
3-2 - Power supply cable). Connect the mouse USB cable to a USB port on the Netbook (see
USB cable).
Figure 3-2: Power supply cable
26
Figure 3-1: Power port located on the back of the instrument
Figure 3-3: Mouse USB cable
Figure
Figure 3-3 - Mouse
ThermoBrite Elite User Manual
3855-7500-501 B02