Leica THERMOBRITE ELITE User Manual page 55

2. Select a slide, and then enter any data concerning the patient: i.e. Name, ID number. You can also overwrite the
Module and slide number or add specific data next to the Module/slide numbers (see image below).
Your data can include letters, numbers, or symbols up to 80 characters. However, only the first portion will be
displayed in the field.
3. When all slides you want have been added, click Next to display and verify the setup of the Reagent and Waste
Bottles.
4. Check that all Reagent and Waste Bottles are in the position specified on the screen. If they are not, physically
move the bottles as you cannot change the bottle position in the protocol.
5. Click the check box I have confirmed that the reagent and waste setup matches the configuration above.
You cannot click the Next button until this check box is selected.
ThermoBrite Elite User Manual
3855-7500-501 B02
Figure 6-6: Protocol Dashboard—Selected Slide
Figure 6-7: Confirm Reagent and Waste Setup
6. Using the ThermoBrite Elite Software
55