Reagent Preparation And Connection - Leica THERMOBRITE ELITE User Manual

5. Preparing the System for Run
5.1.2

Reagent Preparation and Connection

Before running a protocol on the instrument, perform the following steps:
1. Select the protocol to be run. The Protocol Run Dashboard displays:
The required reagent, including the volume
l
The input port for the reagent,
l
The output port for the waste fluids, including the volume.
l
2. Prepare the required reagents based on the Reagent List displayed on the screen. Reagent preparation
instructions are provided in the ThermoBrite Elite Ancillaries document. Reagent Bottles should also be labeled
with their contents.
3. Disconnect tubing from the appropriate Reagent Bottle caps by removing the tube fitting on the cap.
46
Figure 5-1: Dashboard—Select Protocol
ThermoBrite Elite User Manual
3855-7500-501 B02