M-system 47DAC Operating Manual page 77

(5) Parameter shifting in Infrared Communication Mode
There is no parameter shifting in this mode.
(6) Parameter shifting in Lockout Setting Mode
In Lockout Setting Mode, pressing Alarm/↓ button shifts one parameter to the next (clockwise in the following figure).
Pressing Scale/↑ button shifts one to the previous (counterclockwise).
Measuring Mode
*1 Enabled with the I/O option code '4' , '7' or '8' (network interface).
NOTE
• The display depends on the specifications and settings. The above displays show default values.
• Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode from each parameter.
(7) Parameter shifting in Loop Test Output Mode
There is no parameter shifting in this mode.
Hold down Max/Min + Alarm/↓
at once for a preset time duration
Alarm setting lockout
Initialization
Modbus communication lockout
IR communication lockout
Loop test output lockout
Scaling setting lockout
*1
Forced zero control (Up button) lockout
47DAC OPERATING MANUAL EM-9518-B Rev.4
Lockout Setting Mode
Advanced setting lockout
Modbus setting lockout *1
MAX/MIN display control
lockout
77