M-system 47DAC Operating Manual page 201

4
Press Alarm/↓ button to apply the new setting and indicate the
L alarm setpoint.
• The LL setpoint is registered and the L setpoint is indicated.
• 'LL' indicator turns off and 'L' indicator starts blinking.
5
■ TO GO ON TO SET OTHER ALARM SETPOINTS,
Repeat operation from Step 2.
■ TO RETURN TO THE BANK NO. INDICATION,
Press Alarm/↓ button several times.
NOTE
When the manual sub display reset is set to "alarm setpoint display automatically reset" , the SD returns to the bank No.
indication after the set automatic return time period.
Blinking
47DAC OPERATING MANUAL EM-9518-B Rev.4 201