M-system 47DAC Operating Manual page 174

4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the OFF timing delay will be indicated ('OF-TDLY' on the SD), or the startup timer will be
indicated ('STR-TMR' on the SD) with the event trigger mode set to "sampling hold" .
• Press Scale/↑ button, and the event trigger mode will be indicated ('EVENT' on the SD).
5
■ TO GO ON TO SET THE OFF TIMING DELAY,
Skip to Step 2 in "21.3 OFF TIMING DELAY" .
■ TO QUIT,
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
47DAC OPERATING MANUAL EM-9518-B Rev.4 174