M-system 47DAC Operating Manual page 71

■ MODE TRANSITION
Hold down Alarm/↓ + Scale/↑ + Shift
Loop Test Output Mode
Infrared Communication Mode
Modbus Setting Mode
■ TRANSITION FROM MEASURING MODE TO EACH MODE
To Scaling Setting Mode
To Alarm Setting Mode
To Advanced Setting Mode
To Modbus Setting Mode
To Infrared Communication Mode
To Lockout Setting Mode
To Loop Test Output
■ TRANSITION FROM EACH MODE TO MEASURING MODE
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
Measuring
Mode
at once for ≥ 5 sec.
Hold down
Alarm/↓ or Scale/↑
for ≥ 1 sec.
Hold down Alarm/↓ + Up
at once for ≥ 3 sec.
Hold down
Alarm/↓ or Scale/↑
for ≥ 1 sec.
Hold down Alarm/↓ + Shift
at once for ≥ 3 sec.
Hold down Alarm/↓ or Scale/↑
for ≥ 1 sec.
Hold down Alarm/↓ or Scale/↑
for ≥ 1 sec.
Advanced Setting Mode
Hold down Scale/
Hold down Alarm/
Hold down Alarm/
Hold down Alarm/
Hold down Alarm/
Hold down Max/Min + Alarm/
Hold down Alarm/
POWER ON
Hold down Max/Min + Alarm/↓
at once for a preset
Alarm/↓ or Scale/↑
Hold down Scale/↑
Hold down
Alarm/↓ or Scale/↑
for ≥ 1 sec.
Hold down Alarm/↓
for ≥ 3 sec.
Hold down Alarm/↓ or Scale/↑
for ≥ 1 sec.
Hold down Alarm/↓ + Scale/↑
at once for ≥ 3 sec.
↑
button for 3 seconds or more.
↓
button for 3 seconds or more.
↓ ↑
+ Scale/ buttons at once for 3 seconds or more.
↓
+ Shift buttons at once for 3 seconds or more.
↓
+ Up buttons at once for 3 seconds or more.
↓
buttons at once for a preset time duration.
↓ ↑
+ Scale/ + Shift buttons at once for 5 seconds or more.
47DAC OPERATING MANUAL EM-9518-B Rev.4
May be disabled depending on the
model suffix codes.
Indicated regardless of the model
suffix codes.
time duration
Hold down
Lockout Setting Mode
for ≥ 1 sec.
for ≥ 3 sec.
Scaling Setting Mode
Alarm Setting Mode
71