M-system 47DAC Operating Manual page 125

3
Press Shift and Up buttons to select the P output.
• Select one among 'OFF' , 'LL' , 'L' , 'H' and 'HH' .
NOTE
An alarm indicator blinks corresponding to the setting.
4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the latching alarm will be indicated ('OUT-STP' on the SD).
• Press Scale/↑ button, and the manual sub display reset will be indicated ('S-DISP' on the SD).
5
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
Blinking
47DAC OPERATING MANUAL EM-9518-B Rev.4
Blinking
125