M-system 47DAC Operating Manual page 152

4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the firmware version indication will be indicated ('FRM-VER' on the SD), or the manual sub
display reset will be indicated ('S-DISP' on the SD) with the alarm setting lockout set to "completely unlock Alarm Set-
ting Mode" .
• Press Scale/↑ button, and the transition time to Lockout Setting Mode will be indicated ('PROTECT' on the SD).
5
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
47DAC OPERATING MANUAL EM-9518-B Rev.4 152