M-system 47DAC Operating Manual page 243

■ CONFIRMATION AND CONFIGURATION OF ALARM SETPOINTS
HH alarm
setpoint
H alarm setpoint
* Press
NOTE
• The alarm setpoints cannot be confirmed and configured with the alarm setting lockout set to 'LV2' .
• Alarm setpoints can be confirmed whenever in Measuring Mode except in error indication (excluding 'S.ERR').
Measuring Mode
to shift the SD into the setting standby mode.
POWER ON
Con rming
alarm setpoints
LL alarm
setpoint
L alarm setpoint
47DAC OPERATING MANUAL EM-9518-B Rev.4
Measurement
stopped
To each mode
Measurement
started
243