M-system 47DAC Operating Manual page 106

4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the LL (L, H, HH or P) OFF delay time will be indicated ('OFDLYLL' , 'OFDLY L' , 'OFDLY H' ,
'OFDLYHH' or 'OFDLY P' on the SD).
• Press Scale/↑ button, and the LL (L, H or HH) deadband ('HYST LL' , 'HYST L' , 'HYST H' or 'HYST HH' on the SD), or the
HH coil at alarm ('RELAYHH' on the SD) will be indicated.
5
■ TO GO ON TO SET ANOTHER ON DELAY TIMES,
Repeat operation from Step 2.
■ TO SET THE NEXT PARAMETER,
Skip to Step 2 in "9.6 OFF DELAY TIME" .
■ TO QUIT,
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
47DAC OPERATING MANUAL EM-9518-B Rev.4 106