M-system 47DAC Operating Manual page 146

3
Press Shift and Up buttons to select the display color.
• Select one among 'GRN-R' , 'GRN' , 'RED-G' and 'RED' .
4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the automatic return time to Measuring Mode will be indicated ('RETURN' on the SD).
• Press Scale/↑ button, and the low-end cutout value will be indicated ('ZLMTN' on the SD), or the low-end cutout will be
indicated ('ZEROLMT' on the SD) with the low-end cutout set to "low-end cutout OFF" .
5
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
Blinking
47DAC OPERATING MANUAL EM-9518-B Rev.4 146