Lockout Setting; Operating Procedure - M-system 47DAC Operating Manual

32.1 LOCKOUT SETTING

32.1.1 OPERATING PROCEDURE

1,3,
4
1
1
Hold down Max/Min and Alarm/↓ buttons at once for a preset
time duration to move on to Lockout Setting Mode.
• The alarm setting lockout is indicated.
• The SD indicates ' A L PRT' .
2
Press Shift and Up buttons to select the alarm setting lockout.
• Select one among 'LV1' , 'LV2' and 'LV0' .
NOTE
Select 'OFF' or 'ON' depending on the parameters.
3
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the scaling setting lockout will be indicated ('SC PRT' on the SD).
• Press Scale/↑ button, and the initialization will be indicated ('INIT' on the SD).
4
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
2
3,4 2
NOTE
Procedures to set the alarm setting lockout are de-
scribed here. The procedures of other lockout settings
are same.
47DAC OPERATING MANUAL EM-9518-B Rev.4
Blinking
216