Setup The Loops/Phases Of The Subgroup; Figure6-28 : Loops/Phases Of Subgroup Setting - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
 Copy：To copy the settings of a pre-set group to the new
 Remove：Click the radio button in front of the group and
 Close：Click the "Close" button to return to group setting
6.7.4

Setup the loops/phases of the subgroup

i Click the "Set up" button (
window.
ii Select the loop/phase of the power meter and click
loop/phase to the lists. Click "Close" button to return to group
setting page.
and click on "Move Down" to move the group to lower order
(lower index number (No.)).
group, please click the radio button in front of the pre-set
group and then click on "Copy", a new group (in sequence)
will be added to the list and the settings of the old group will
be copied to this newly added group.
click on "Remove" to remove the selected group.
page.
Figure6-28 :
) of subgroup to open the setting
Loops/Phases of subgroup Setting
to add this
68